Case Studies

IXXAT Safe T100 and Anybus CompactCom are used to enable safety interlock systems to communicate with safety networks.

Anybus technology improves flexibility and accelerates time to market for Modbus Micro Motion transmitters with Ethernet/IP connectivity.

Processcomponent in Sweden uses the Anybus M-Bus to Modbus-TCP gateway to quickly connect M-Bus sensors to the OptoEMU Energy Monitoring System. This provides building owners with real-time data from their buildings so they can do monitoring, logging and invoicing.

Prästjorden’s Water Station in Halmstad use pumps controlled by drives from CG Drives. These drives use Anybus CompactCom to communicate with both Modbus- TCP and PROFIBUS which are used in the water station.

Anybus X-gateways connect EtherNet/IP- based honing machines to several other industrial networks, freeing up resources and decreasing costs at Nagel Precision.

SELI Tunneling is in charge of drilling the tunnels for the new Copenhagen Metro. Their tunnel-building machines run DeviceNet while their new erector arm runs CANopen. To bridge these networks, they used the Anybus X-gateway CANopen.

How London Electronics enabled their large message displays to communicate on PROFIBUS.

American machine builder JSI has built an automated slitting machine with robotic blade changers. HMS technology gets the machine connected —in several different ways.

Anybus Wireless Bolt™ gives the STERISAFE™-Pro disinfection robot wireless access. This enables users to control the robot using a tablet.

The Anybus Communicator CAN is used to enable communication between the CAN-bus in straddle carriers and a Modbus TCP-based monitoring system. Also, a programmable Communicator is used to connect GPS trackers (NMEA-based) to the CAN-bus of the straddle carriers.